This is a directory of the most prevalent shapes of carbide burrs:

Cylinder end-cut shape
Cylinder end-cut shape contains a flat end and is also useful for working on materials which may have right angles along with eliminating features. When completing contours on materials, a trendy solid carbide burr. Flat surfaces are removed from nearly all materials. Carbide cylindrical form end cut burs may be used for either end or side cutting because of the versatile nature. Deburring and polishing flat bottom holes and slots are a couple of common applications for them.

Cone shape
Deburring gear teeth, heat exchanger fan blades, inner bevel edges, and internal pipe edges are the applications in which cone-shaped carbide burrs are developed. A similar function as a countersink, as well as chamfers inside holes intentionally.

Taper shape
The removing of round features from a workpiece produces a creation that is a lot more seamless. An operating instrument that is capable to access restricted locations and machine material surfaces

Flame shape
When cutting materials with round edges, utilize a carbide burr the same shape as a flame. The flame form of carbide burrs is meant for use in deburring and polishing elliptic surfaces on steel dies, forgings, castings, and metal patterns.

Tree shape
being a tree in features however with a pointy tip at the top. The round edges are ground by the number of carbide burrs in succession. This type can help you easily access lengthy, tight places where are inaccessible with the most of the other shapes. Deburring and completing the deep contoured surfaces of steel dies, moulds, and metal patterns are the primary functions that Tree Shape carbide burrs are intended to do. They may also be used to restore damaged places on dies that were due to slugs.

Oval shape
Because you always work on any project, this perfect carbide burr efficiently clears round edges about the workpiece that’s been handed to you personally. Oval-shaped carbide burs bring deburring and polishing curved surfaces in steel dies, forgings, castings, and metal patterns. These burs are created from an oval cross-section. They are utilized for your technique of treating difficult fillet welds.

Ball shape
Carbide Deburring round bottom holes, curved slots, and curved metal and material surfaces are one of the applications for which ball-shaped burs were devised. Moreover, you need to use the crooks to widen or lengthen skin pores to be able to treat hard fillet welds. The graceful machining of all round edges of workpieces, along with the preparation of workpieces for brazing, is made possible from the ball shape.
For details about SB-9 Carbide Burrs check out our internet page