Home > Writing and Speaking > Tips on How to Make a Drywall Ceiling

Tips on How to Make a Drywall Ceiling

One of the first things the do-it-yourselfer realizes when studying developing a drywall ceiling is no man can be an island – unless he uses rented equipment! For the reason that panels are big, bulky, and awkward, hanging drywall on a ceiling entails either: the help of someone else or renting a drywall jack from your local store. The cable mechanism on drywall jacks just isn’t difficult to operate, and jacks do a great job of holding the drywall within a secure, flat position making it possible to easier attach it towards the ceiling.


Tools & Materials

How to construct a Painting Popcorn Ceiling includes being aware of what all tools and material you may need. As well as either someone else to help you or a drywall jack, you can also require a hammer, a drill which has a screwdriver bit, and nails or screws for drywall. You’ll also, needless to say, need to measure your ceiling (twice!) and purchase enough drywall, with a little extra in the event of mistakes, for the task.

Mark Joists First

Get the boards – usually 2x4s or 2x6s – that be ceiling joists by tapping down the wall studs which has a hammer and following inside the wall towards the ceiling. In figuring out how to develop a drywall ceiling, mark where these boards are located which has a pencil. These are what you should be attaching the drywall to and marking them beforehand makes it quicker to discover their whereabouts than attempting to find them since you are nailing or screwing around the drywall. After this you need to measure the place that the bulb proceeds the drywall and eliminate a dent to allow for that portion of the ceiling.

The cruel Part

It’s part in mastering developing a drywall ceiling where you may need the other person (who hopefully has plenty of stamina along with strength!) to hold the drywall up to the ceiling or position the drywall panel around the jack. Set the end with the sheet of drywall – using its finished side facing down – in the center with the ceiling board (joist) to which you are going to nail it. Nail across the outside the panel with regards to a less than an inch through the edges to avoid the drywall from splitting or cracking. The one who is holding the panel can now move or, if you’re using a jack, you’ll be able to move it out of the way.

Allow it to be Pretty

Countersink nails or screws at six- or seven-inch intervals all down the entire joist to which the drywall has become attached. Countersinking allows you to conceal the heads with the nails/screws with compound so that when you paint, the heads will not be whatsoever visible. Although not a legitimate a part of finding out how to develop a drywall ceiling, figuring out how to conceal ugly nail or screw heads serves its very own purpose for overall general carpentry knowledge.
For more information about Painting Popcorn Ceiling see our web page: visit here

You may also like...

Leave a Reply