The carbide Burrs are primarily employed in deburring, that is removing burrs, sharp edges, and excessive materials together with grinding, shaping, and cutting of materials.

On this page, we’ll be taking a look at facts about the tungsten carbide burrs that you should know and the way to rely on them.

We should get started!

1. Carbide Burrs can be utilized on the wide range of Materials

Tungsten carbide burrs is utilized in a wide array of materials including all kinds of wood, plastics such as the Glass fiber Reinforced Plastic (GRP), carbon fiber reinforced plastic (CRP), fiberglass, acrylics and metals including certain, aluminum, and steel. Carbide burrs are perfect for soft metals for example silver, platinum, and gold as they use a long duration without breaking or chipping. Metals include titanium, nickel, cobalt, zinc, plus more.

What exactly are Carbide Burrs Used In?

Carbide burrs are normally found in air tools such as pneumatic rotary tools, die grinders and high-speed engravers. Others are the hobby rotary tools, flexible shafts, pendant drills, and micro motors.

Applications of Carbide burrs

Generally, the carbide burrs find application in a wide array of industries amongst including the metal smith, dental, automotive, aerospace industries plus much more. During these industries they are typically useful for sculpting, cylinder head porting, grinding, deburring, casting, chamfering, welding, making jewelry, wood carving, model engineering, tool making, and also other metalwork.

2. Carbide Burrs are usually available in Two Cuts; Single Cut and Double/Diamond Cut

With the right-handed spiral flute, the cut carbide burrs, also known as the one flute, will remove material quickly which has a smooth finish. They are basically in combination with ferrous metals, certain, copper, hardened steel, and metal. They may be well suited for deburring, milling, and high stock removal.

However, the double cut carbide burrs sometimes referred to as cross cut or diamond cut due to 2 flutes cut across each other are generally used on all non-metal materials for example wood and plastics, ferrous and non-ferrous metals, soft steel and aluminum. The double cut carbide burrs produce smaller chips as they cut away the pad hence leaves a smoother finish as opposed to single cut.

3. Carbide Burrs Shapes

The cut or profile you are wanting to achieve will aid you to help make your range of what model of carbide burr to utilize. Here’s a report on the various carbide burr shapes:

· Carbide Ball Burrs

· Carbide Inverted Cone Burrs

· Carbide Tree Burrs

· Carbide Pointed Cone & Ball Nose or Carbide Round Nose Burrs

· Oval Burrs

· Cylinder Burrs. End/Ball nose/ Round Nose Cut

· Flame Burrs

· Countersink Burrs

· Oblate Spheroid

4. Don’t Apply An excessive amount of Pressure

Little pressure must be applied. That is to stop chipping outside the cutting edges and reduction in living in the burr.

5. At what speed (RPM) if your Carbide Burrs be used?

The contour is produced as well as the material to get done determines the rate of which you use your carbide burr set in your rotary tool. However, the burr should be started slowly while increasing the speed as you progress. The velocity must not exceed 35,000 RPM.
For more information about SE-1 Carbide Burrs explore this site