SA-3 cylinder shape burrs are perfect for interior contour work and deburring. Due to the extreme hardness of the tungsten carbide, you can use it on far more demanding jobs than HSS (High-Speed Steel).

Double cut or Cross cut carbide burrs usually are utilized on ferrous and non-ferrous metals, soft steel, and also for all non-metal materials like stone, plastics, wood floor, and ceramic. Double cut burrs will leave a slightly smoother finish than single cut because of producing smaller chips as they cut away the information. Use for medium stock removal, deburring, finishing, and cleaning. A double-cut carbide burr is regarded as the popular cut and can see you through most applications.

Machines Used On:

Die Grinders and hand-held pneumatic grinders

Application:

Ferrous Materials – Iron, Steel, Stainless, Steel, Titanium, Nickel, Wrought Iron
Non-Ferrous Materials – Copper
Many other materials – Fiberglass, Plastic, Hard Rubber, Wood, Stone
Cylinder Shape burrs are good for interior contour work like peripheral and face milling.

Safety Tips & Techniques:

Tool speed will be determined from the material you are using your burr on. If you might be experiencing chipping, you are most probably operating at excessive of speed to the application. Start having a slower speed and increase during this process before you reach the best results

Apply light pressure and allow the tool carry out the work. Bearing documented on the tool can lead to reduced tool life plus a dull burr.

Always wear proper PPE to add (but not tied to) safety glasses, hearing protection, respirator, and hand protection. Keep all guards in position on the machine.

Avoid experience electric power drills; the slower speeds may lead to chipping of the workpiece.
For more information about SA-3 Carbide Burrs check this useful resource