In case you have bought a do-it-yourself iPhone repair kit, it’s not at all uncommon to encounter several snags through the iPhone repair process. Take a deep breath, these are typically easily avoided or corrected with the right instructions along with the right tools. If you have not yet begun the iPhone repair process, it’s a good plan to see through this article to understand the commonest conditions sometimes arise so that you can avoid them altogether.
What is important to remember when performing DIY iPhone repair would be to purchase quality repair parts. Make sure to only buy a repair kit from the trustworthy source with guaranteed parts. Using parts which aren’t guaranteed is only going to lead to more difficulty with your iPhone over time. Trusted iPhone repair centers will give you using a complete repair kit that also includes the best parts and tools, detailed instructions, customer support just in case you encounter any issues, and a warranty.
Listed here are the most typical apple iphone 4g repair issues:
Antenna Issues
In case you finish fixing your iPhone to discover your phone doesn’t have signal, it may be a problem using the antenna. On occasions when the antenna is disconnected the metal surrounding the antenna connection will get slightly bent. Use a nylon spudger to carefully complete the metal before trying to reconnect the antenna again.
When reattaching the antenna here are a couple circumstances to bear in mind:
– Remember, you’ll find four teeth that need to be correctly placed under the apple iphone 4g frame
– Ensure that the screw holding together the speaker assembly is screwed down tightly
– Make certain the antenna wire is securely clipped documented on the logic board
If you’re still failing to get a sign, try resetting your network connections.
Logic Board Issues
If you’re experiencing difficulty taking off the logic board, you’ll be able that all of the screws are already removed. The logic board takes place set up by three screws and also the Sim. Among the three screws is included with a white water sensor. The Sim holds the logic board in position set up screws have already been removed. To simply take out the Sim utilize a thumb tack or paper clip to gently press in around the Sim tray and it will slide out.
To soundly get rid of the logic board it’s best to start on the base and gently raise. Remember, you will find 6 connections that must definitely be unclipped through the logic board before it is removed. Make sure that the logic board doesn’t touch the antenna connection throughout the iPhone repair process.
iPhone 4 Battery Replacement
When replacing battery within your iPhone, be sure to NOT use any metal instruments when detaching the electrical connection. This might make electrical connection short circuiting. Instead use a nylon spudger often incorporated into iPhone repair kits.
When taking out the battery, the plastic pull tab sometimes tears off. Employing a tool this type of nylon spudger like a lever to softly pry it out increases results.
If you learn your iPhone will not turn on after performing iPhone repair, first, check to be sure that the car battery is securely connected. If your battery was reattached properly, try a hard reset on your phone (press and retain the Sleep/Wake button and also the Home button for 10 seconds before the Apple logo appears). If thay man hinh iphone uy tin tphcm of won’t correct the problem, plug your phone in the power outlet or hook up with iTunes.
For details about thay man hinh iphone tphcm webpage: look at more info.
