There are numerous kinds of automotive and marine electrical connectors. A few of the common electrical connectors are butt connectors, ring terminals, spade terminals, and quick disconnect connectors.

Butt connectors are utilized to splice two wires together.

Ring terminals are used to connect the wire into a stud point as being a screw for grounding or similar.

Spade terminals may be used like ring terminals nevertheless the nice benefit of the spade terminal or fork terminals is the stud does open to connect with it. The spade slip around the stud for the connection.

Quick disconnect connectors are used to connect to a tab and are avalable in four tab sizes,.110 tab is 1/8 inch,.187 tab is 3/16 inch,.250 tab is 1/4 inch and.375 tab is 3/8 inch. There are female and male quick disconnect connectors the feminine will slide on the male tab. Other electrical connectors include copper lug ring terminals, crimp caps, t tap connectors, plier tap connectors, hook terminals, and pin terminals.

Electrical connectors may be insulated or non insulated and come in various types of insulation. The non insulated electrical connector is usually bare copper that features a tin plating. Insulated terminals comes in PVC insulated, nylon insulated and warmth shrink insulated. The PVC insulated type will be the cheapest and many common. PVC tends to be a harder insulation and will crack when crimped and for this reason I don’t recommend with these. Nylon insulation is a softer insulation will not crack in the event the terminal is crimped. The nylon insulation will also withstand higher temperatures. I recommend using nylon insulated terminals and connectors. Heat shrink insulated terminals and connectors are great for applications in which the terminal is confronted with outside elements such as high temperatures, rain, snow, and underwater applications.

The heat shrink insulated terminals with adhesive lining create waterproof connections on the wire. Although heat shrink terminals will not be free they are the best connectors to work with since last a long and hardly ever corrode.

When purchasing Furukawa Sumitomo Connectors is advisable to use UL listed terminals and connectors to successfully are becoming quality connections. I would recommend steering clear of terminals and connectors which are produced in China because of the poor standards and cheap materials they normally use to really make the connectors. In the event you browse the internet you’ll find quality terminals and connectors at good prices.

Contact:
Yeahui Technology Limited
Email: [email protected]

To learn more about ECU Wiring Harness go to see our web page.